cc65 CRT help Needed
Moderator: Moderators
cc65 CRT help Needed
Anyone with cc65 2.18 working 8K or 16K Cartridge project examples that use conio.h or other libraries? If not, anyone interested in helping a poor C developer who needs to write a utility cart program for the VIC-20 get such an example project created? I have 3 projects (8K Cart, 16K App, and 16K Cart) I can put online if folks are keen to help. I gave up 5 years ago (2014), but I just really need to get this off my list of project failures.
Jim
Jim
Re: cc65 CRT help Needed
Hi good afternoon.
It would be nice if you could create a functional cfg
which can also be used with the 28kb.
greeting
It would be nice if you could create a functional cfg
which can also be used with the 28kb.
greeting
Re: cc65 CRT help Needed
it shouldnt be hard to do... isnt there a cartridge config for C64 already? should work pretty much the same for vic20, except some adjusted memory addresses of course. the biggest challange is probably to come up with a scheme to deal with those holes in the memory map.
poke me again after we pushed out that VICE release
poke me again after we pushed out that VICE release
I'm just a Software Guy who has no Idea how the Hardware works. Don't listen to me.
Re: cc65 CRT help Needed
I thought so, and Oliver tried to help. I have his examples, but they never did work, and I got busy with other things. I can put them up on github or somewhere. I believe they are massaged from the 64 examples, but could be wrong.
Re: cc65 CRT help Needed
if one time could produce a suitable cfg for the vic20 for different memory sizes (3,6,8+ kb) a problem would be solved by few for the vic20. one has then already a start to deal again with cc65.
Maybe somebody can do it. I think there is an initial beginning but it does not really work. because he only runs on a certain vervion of the cc65.
you can not take the c64.
The biggest problem is a cfg for the vic20
greeting
Thank you.
Maybe somebody can do it. I think there is an initial beginning but it does not really work. because he only runs on a certain vervion of the cc65.
you can not take the c64.
The biggest problem is a cfg for the vic20
greeting
Thank you.
Re: cc65 CRT help Needed
making a config for expanded vic20 (as in ram expansion) is trivial, just move the memory top/bottom as needed
I'm just a Software Guy who has no Idea how the Hardware works. Don't listen to me.
Re: cc65 CRT help Needed
Hi good afternoon.
For me it's not so easy with 70 years.
especially as even younger ones have tormented with it.
can you please make me a cfg for over + 8k or 28k.
and I recommend a cc655 what synonymous with it runs.
The CC65 are very picky with the CFG. one cc65 works with it and the other one does not.
Thank you for your effort, I would be very helpful.
Thank you.
greeting
For me it's not so easy with 70 years.
especially as even younger ones have tormented with it.
can you please make me a cfg for over + 8k or 28k.
and I recommend a cc655 what synonymous with it runs.
The CC65 are very picky with the CFG. one cc65 works with it and the other one does not.
Thank you for your effort, I would be very helpful.
Thank you.
greeting
Re: cc65 CRT help Needed
Groepaz: Poke...
Re: cc65 CRT help Needed
I just committed to GitHub a cart stub that I made some time ago when playing with CC65. There is probably room for improvement but I hope this gets you going.
https://github.com/ops/vic-cc65-cart
https://github.com/ops/vic-cc65-cart
Re: cc65 CRT help Needed
yay! would be nice getting this into the main repo then!
I'm just a Software Guy who has no Idea how the Hardware works. Don't listen to me.
Re: cc65 CRT help Needed
Hi good afternoon.
how are you a professional.
i need a cfg and crt0.s , where the program starts at adr 8192
and I can make graphics for the vic20 from adr 4352.
I have set memory:
8k, 8k, 8k and 8k from adr $ a000
and the fixed memory of 3.5k
you can please help me as a specialist.
Thank you.
greeting
how are you a professional.
i need a cfg and crt0.s , where the program starts at adr 8192
and I can make graphics for the vic20 from adr 4352.
I have set memory:
8k, 8k, 8k and 8k from adr $ a000
and the fixed memory of 3.5k
you can please help me as a specialist.
Thank you.
greeting
Re: cc65 CRT help Needed
hello, error in this programm:
https://github.com/ops/vic-cc65-cart
------------------------------------------
D:\cc65\pebi-c>cl65 -C cart.cfg -o cart.bin cart.c crt0.s
ld65.exe: Error: cart.cfg(2): Attribute expected
------------------------------------------
greeting.
https://github.com/ops/vic-cc65-cart
------------------------------------------
D:\cc65\pebi-c>cl65 -C cart.cfg -o cart.bin cart.c crt0.s
ld65.exe: Error: cart.cfg(2): Attribute expected
------------------------------------------
greeting.
Re: cc65 CRT help Needed
Try updating you compiler. I'm using the latest from GitHub.
Re: cc65 CRT help Needed
You must disable all memory expansions.