data transfer rs232 with vic20.
i have notebook with win10.
I have:
- tera term
- Setup VSPE
- vice
vice set up for the rs232 :
\\.\com1: baud=300 parity=N data=8 stop=1
with setupvspe I have set up a virtual rs232 com1.
I transfer the data with tera term.
You can also transfer data to the pc with an arduino.
greeting
this demo:
-----------------------------------------
10 print "opening port..."
11 open 1,2,0,chr$(10)
12 gosub 1000: if ec <> 0 then close 1:end
15 print "type your message:"
20 for i = 0 to 2
30 input m$
40 print#1, m$ + str$(i) + chr$(13) + chr$(10)
50 gosub 1000
55 next i
60 print "waiting for reply..."
70 get #1, a$: ec = st: if ec = 8 then goto 70
80 if ec <> 0 then print "error:";ec
100 if a$ <> "" then print a$;
105 goto 70
1000 ec = st
1001 if ec > 0 then print "error:";ec
1010 return
------------------------------------------
data transfer rs232 with vic20.
Moderator: Moderators
data transfer rs232 with vic20.
- Attachments
-
- SetupVSPE.zip
- (3.02 MiB) Downloaded 87 times
Last edited by funkheld on Fri Oct 25, 2019 4:11 am, edited 2 times in total.
Re: data transfer rs232 with vic20.
tera term is to big for the forum.
teraterm-4.96.exe
greeting
teraterm-4.96.exe
greeting
Re: data transfer rs232 with vic20.
hello, with the arduino it works too.
then you do not need the virtual port on the pc.
greeting
then you do not need the virtual port on the pc.
greeting