FOR SALE: VIC20 FULL-RAM expansion cartridge +37K RAM with RESET, golden fingers edition!

Vic 20 Item Exchange

Moderator: Moderators

User avatar
MCes
Vic 20 Afficionado
Posts: 457
Joined: Fri Jul 24, 2015 1:19 am
Location: Italy

FOR SALE: VIC20 FULL-RAM expansion cartridge +37K RAM with RESET, golden fingers edition!

Post by MCes »

VIC20 FULL-RAM + 37K RAM expansion cartridge with RESET, golden fingers edition!

Every VIC 20 expandable memory areas can be covered (also the I/Os areas), and BLK 5 can also be write protected!

+37k gold.JPG
retro.JPG


Dip-switch:
1.) 8K= BLK1: $2000-$3FFF (8192-16383)
2.) 8K= BLK2: $4000-$5FFF (16384-24575)
3.) 8K= BLK3: $6000-$7FFF (24576-32767)
4.) ON= BLK5 write protected
5.) 8K= BLK5: $A000-$BFFF (40960-49151)
6.) 3K= RAM1,2,3: $0400-$0FFF (1024-4095)
7.) 2K= I/O2,3: $9800-$9FFF (38912-40959)
8.) ON= enable expansion cartridge

Total of +37K of RAM for your VIC20!

NOTE:
The 2K IOs area is important because is unusual,
the perfect place for a speedloader like "RABBIT" for tape: Rabbit-sys38912.prg or for software-kernal simil-jiffydos: tokra_2K_SJload_$98.prg

About how VIC20 manage memory areas in relationship at which areas are expanded

This cartridge will be assembled on request.
20€ +shipment +PayPal fees
(On sale elsewhere too)

Doom.JPG
dentro3.JPG
dentro2.JPG
dentro1.JPG
Last edited by MCes on Sat Jan 25, 2020 11:04 am, edited 22 times in total.
"Two things are infinite, the universe and human stupidity, and I am not yet completely sure about the universe." (Albert Einstein)
User avatar
vicist
Vic 20 Afficionado
Posts: 352
Joined: Tue Oct 09, 2012 5:26 am
Location: Sheffield, UK

Re: FOR SALE: VIC20 FULL-RAM expansion cartridge +37K RAM with RESET!

Post by vicist »

I so want one of these!!!

PM sent :D
User avatar
mrr19121970
Vic 20 Nerd
Posts: 873
Joined: Tue Jan 19, 2016 9:22 am
Location: Germany
Occupation: IT service manager

Re: FOR SALE: VIC20 FULL-RAM expansion cartridge +37K RAM with RESET!

Post by mrr19121970 »

Is it HASL or ENIG ?
User avatar
vicist
Vic 20 Afficionado
Posts: 352
Joined: Tue Oct 09, 2012 5:26 am
Location: Sheffield, UK

Re: FOR SALE: VIC20 FULL-RAM expansion cartridge +37K RAM with RESET!

Post by vicist »

Payment sent.
User avatar
MCes
Vic 20 Afficionado
Posts: 457
Joined: Fri Jul 24, 2015 1:19 am
Location: Italy

Re: FOR SALE: VIC20 FULL-RAM expansion cartridge +37K RAM with RESET!

Post by MCes »

mrr19121970 wrote:Is it HASL or ENIG ?
It's HASL
"Two things are infinite, the universe and human stupidity, and I am not yet completely sure about the universe." (Albert Einstein)
User avatar
mrr19121970
Vic 20 Nerd
Posts: 873
Joined: Tue Jan 19, 2016 9:22 am
Location: Germany
Occupation: IT service manager

Re: FOR SALE: VIC20 FULL-RAM expansion cartridge +37K RAM with RESET!

Post by mrr19121970 »

This is a shame. Next batch should be ENIG.
User avatar
MCes
Vic 20 Afficionado
Posts: 457
Joined: Fri Jul 24, 2015 1:19 am
Location: Italy

Re: FOR SALE: VIC20 FULL-RAM expansion cartridge +37K RAM with RESET!

Post by MCes »

vicist wrote:Payment sent.
Payment received,
+37K REU shipped!
"Two things are infinite, the universe and human stupidity, and I am not yet completely sure about the universe." (Albert Einstein)
HouseOfPain
Vic 20 Newbie
Posts: 8
Joined: Tue Apr 26, 2016 10:37 am

Re: FOR SALE: VIC20 FULL-RAM expansion cartridge +37K RAM with RESET!

Post by HouseOfPain »

One for me...plz send me your PayPal Adress via PM.

BR HoP
User avatar
eslapion
ultimate expander
Posts: 5458
Joined: Fri Jun 23, 2006 7:50 pm
Location: Canada
Occupation: 8bit addict

Re: FOR SALE: VIC20 FULL-RAM expansion cartridge +37K RAM with RESET!

Post by eslapion »

MCes wrote:
mrr19121970 wrote:Is it HASL or ENIG ?
It's HASL
HASL can damage a VIC-20's cartridge port connector in the long run...

Behr-Bonz doesn't even use ENIG, it has hard gold plating.
Be normal.
User avatar
MCes
Vic 20 Afficionado
Posts: 457
Joined: Fri Jul 24, 2015 1:19 am
Location: Italy

Re: FOR SALE: VIC20 FULL-RAM expansion cartridge +37K RAM with RESET!

Post by MCes »

Yes, I know: Gold is better than Tin,
but.....
eslapion wrote: HASL can damage a VIC-20's cartridge port connector in the long run...
never heard before....
the worst case after years could be the eventual oxidation of cart fingers,
but (oxide) Tin is soft respect to the contact metal into VIC20 connector, the oxide should be scratched by the connector contact during the insertion.
https://c1.staticflickr.com/3/2645/4148 ... d889_b.jpg
Eventually the very worst case could be a not-contact, but this won't damage the VIC20 and the solution is easy: use a pencil rubber on pcb finghers to eliminate oxide and then you will have years of contacts working!
eslapion wrote:HASL can damage a VIC-20's cartridge port connector in the long run...
Behr-Bonz doesn't even use ENIG, it has hard gold plating.
I saw that a lot of your Behr-Bonz cart was produced with HASL
https://www.google.it/search?q=ber+ronz ... =Behr-Bonz

never heard before that cartridges like as HASL-Behr-Bonz damage the VIC20 connector, but your words induce me to think that your big production had exposed you to the protests of people that had own VIC20 damaged by your cartridge, so I ask you, for direct experience:
how many people that get your HASL-Behr-Bonz (percentage) had the VIC20 damaged by it?
Thanks
"Two things are infinite, the universe and human stupidity, and I am not yet completely sure about the universe." (Albert Einstein)
User avatar
eslapion
ultimate expander
Posts: 5458
Joined: Fri Jun 23, 2006 7:50 pm
Location: Canada
Occupation: 8bit addict

Re: FOR SALE: VIC20 FULL-RAM expansion cartridge +37K RAM with RESET!

Post by eslapion »

MCes wrote:I saw that a lot of your Behr-Bonz cart was produced with HASL
NEVER!! :shock:

Somebody CLONED the Behr-Bonz around 2011 and these clones are easy to distinguish because they do not have the hole for the case screw in the center and they have red PCBs.

Please do NOT attribute to me what somebody else did.

The very first 2 prototypes of the Behr-Bonz do not have gold plating and that's ALL!
...your words induce me to think that your big production had exposed you to the protests of people that had own VIC20 damaged by your cartridge, so I ask you, for direct experience:
how many people that get your HASL-Behr-Bonz (percentage) had the VIC20 damaged by it?
I can't know because, except for the 2 prototypes which were expressly provide as such, I NEVER sold any VIC-20 cartridges which do not have gold plating.

That is one of the prototypes:
Image
Notice the white sticker and the typefaces used on it.

Added edit:
Thomas Lovskog was charged with the production of all Behr-Bonz boards since may 2015 and he delivered to me excellent quality boards with the same gold plating grade you can find on expensive Vector 3677 and 3677-2 prototyping boards. They sell for about 40$US on Digikey.

Between 2006 and 2008 I also sold the Ultimate Expander cartridges and they too all had gold plating on the edge connector.
Last edited by eslapion on Sat Jul 22, 2017 11:58 pm, edited 3 times in total.
Be normal.
User avatar
vicist
Vic 20 Afficionado
Posts: 352
Joined: Tue Oct 09, 2012 5:26 am
Location: Sheffield, UK

Re: FOR SALE: VIC20 FULL-RAM expansion cartridge +37K RAM with RESET!

Post by vicist »

Arrived today at lunchtime.

Tried it out and all configurations work as expected.
Even had a quick game of DOOM just to make sure all 35k are accessible. :D

Not worried about whether it's HASL or ENIG - the thing will just stay plugged in the back.
I now have 1 Vic with full ram configs with SD2IEC for programming and playing Denial member's games, and 1 vic with a behr-bonz for playing all those great cart games.

Just have to work out how to get sjload$98 to work in the I/O area now to be fully geared up. Anyone?
Last edited by vicist on Fri Jul 14, 2017 9:44 am, edited 1 time in total.
User avatar
vicist
Vic 20 Afficionado
Posts: 352
Joined: Tue Oct 09, 2012 5:26 am
Location: Sheffield, UK

Re: FOR SALE: VIC20 FULL-RAM expansion cartridge +37K RAM with RESET!

Post by vicist »

OK. Sussed it out.

1. Enable I/O (switch 7 down)
2. Load "sjload$98",8,1
3. Press reset - If you try to load anything without doing this, you will get 'out of memory' error.
4. SYS 38912

Anything you load from SD2IEC will now be accelerated. I loaded DOOM and the splash screen came up immediately. After that disappeared, I was ready to play the game in about 5 seconds!!! :shock:

When you are ready to do something else, just repeat steps 3 and 4 and all disk activity is turbo'ed.
This really is a great little card. :D

Thanks MCes.
User avatar
MCes
Vic 20 Afficionado
Posts: 457
Joined: Fri Jul 24, 2015 1:19 am
Location: Italy

Re: FOR SALE: VIC20 FULL-RAM expansion cartridge +37K RAM with RESET!

Post by MCes »

vicist wrote: This really is a great little card. :D
Thanks MCes.
Thanks Vicist,
I'm happy for your enthusiasm in discovering the potentiality of your "new" VIC20 system...
If I remember well the RAM into i/o areas is (now) out of VICE possibilityes.... the real world win!

Try the attached file, it should be the SJLoad $98 modified to be started by "SYS40000", an more mnemonic address....

NOTE: this file is wrong, see two post after...
SJL98-SYS40000.zip
SJL 07 $9800 SYS40000
(1.27 KiB) Downloaded 332 times
Last edited by MCes on Tue Jul 18, 2017 1:19 am, edited 2 times in total.
"Two things are infinite, the universe and human stupidity, and I am not yet completely sure about the universe." (Albert Einstein)
User avatar
tokra
Vic 20 Scientist
Posts: 1120
Joined: Tue Apr 27, 2010 5:32 pm
Location: Scheessel, Germany

Re: FOR SALE: VIC20 FULL-RAM expansion cartridge +37K RAM with RESET!

Post by tokra »

Your binary does not work with SYS4000 (it still loads to $9800). However, I compiled a version to $9c40 a while back to be found here:

http://www.tokra.de/vic/2kexpansion/sjload$9c40-s.prg

This is most likely the same reduced version that is also on the MegaCart. When compiling SJLOAD you can turn off features like support for SAVE or printing the load-address. This makes it small enought to fit it from $9c40-$9fff.

Also, you do not need to reset after loading, a simple "NEW" will do.

VICE supports the IO2 and IO3-RAM areas for some time now. However you need go to "Settings-Cartridge/IO-setting-Enable I/O-2 RAM" (or I/O-3 RAM).
Post Reply