OPEN15,8,15,”XF2:NAME.TAP”:CLOSE15
If the red led flashes after sending this statement it could be because:
1 - You still have the old version of the Firmware that did not support XF2 command (here please make sure you've the newest one=version F before going any further)
2 - the SD card is write protected
3 - SD card space is exhausted
4 - a file named NAME.TAP already exists on SD card
5 - SD card is not (fully?) inserted into the slot
6 - SD Card is not formatted or not formatted with FAT32 filesystem
Firmware is available here:
http://www.manosoft.it/?page_id=1050
Download the file labelled as: Latest firmware C64SD V3 Princess – download – note: 0.10.3.F (date 17 Dec 2014) and follow the instructions to carry out the upgrade.
If you want to discover why the error happened, in the manual there is a fragment of code you can run to see exactly what the error code and error description are
The above statement can be given as single command unless NAME.TAP is so long you cannot fit the whole command inside 4 lines in the screen.
In case you would like to shorten troubleshooting path however you can also try to use the VIC-MENU program that is making all the process automatic. VIC-MENU program is available in the package downloadable from manosoft.it site. Grabbing using the menu works (for all Commodore machines) essentially as visible in this video
http://www.commodore16.com/additional-g ... -princess/
In case of any further issue if you wish you can contact us at the above email addressee (see at the end of previous post) and we will sort it out. If you prefer you can continue to post here and I'll try to followup asap.
We're always available in case of any issue
![Wink :wink:](./images/smilies/icon_wink.gif)