Where can I download SJLOAD for Vic-20?
Where can I download SJLOAD for Vic-20?
I can't find it!
PRG Starter - a VICE helper / Vic Software (Boray Gammon, SD2IEC music player, Vic Disk Menu, Tribbles, Mega Omega, How Many 8K etc.)
Thanks!!
PRG Starter - a VICE helper / Vic Software (Boray Gammon, SD2IEC music player, Vic Disk Menu, Tribbles, Mega Omega, How Many 8K etc.)
Hmmm... So how do I use this on a Vic-20? In expanded and unexpanded mode? And where is SJLOAD put in the vic-20 memory map?
PRG Starter - a VICE helper / Vic Software (Boray Gammon, SD2IEC music player, Vic Disk Menu, Tribbles, Mega Omega, How Many 8K etc.)
The file contains sjload and file browser for vic 20, c64 and c128, I didn't make this file. It's by an Italian as I can tell from the funny translation
There should be a document explaining the contents of the archive.
There should be a document explaining the contents of the archive.
Pallas - OPByte
http://www.opbyte.it/vic20/
http://www.opbyte.it/vic20/
The file contains sjload and file browser for vic 20, c64 and c128, I didn't make this file. It's by an Italian as I can tell from the funny translation
There should be a document explaining the contents of the archive.
There should be a document explaining the contents of the archive.
Pallas - OPByte
http://www.opbyte.it/vic20/
http://www.opbyte.it/vic20/
I did read a text file, and then tried LOAD"!*FB",8,1 but that didn't work. I expect that is for a C64.
PRG Starter - a VICE helper / Vic Software (Boray Gammon, SD2IEC music player, Vic Disk Menu, Tribbles, Mega Omega, How Many 8K etc.)
Some file names contain "20", some "64".
The quick load command works only if you have the files in the correct order in the directory.
Try loading "20.prg": the subsequent prg you'll load should be jiffydos ed.
The quick load command works only if you have the files in the correct order in the directory.
Try loading "20.prg": the subsequent prg you'll load should be jiffydos ed.
Pallas - OPByte
http://www.opbyte.it/vic20/
http://www.opbyte.it/vic20/
I don't think so. I tried loading a game, which took 7 seconds. Then I tried to load the same game with my vic-menu, and that took less than 6 seconds. Besides that, 20.prg only works on an unexpanded vic-20 and I want to use it with expanded memory.pallas wrote:Try loading "20.prg": the subsequent prg you'll load should be jiffydos ed.
PRG Starter - a VICE helper / Vic Software (Boray Gammon, SD2IEC music player, Vic Disk Menu, Tribbles, Mega Omega, How Many 8K etc.)
- Mike
- Herr VC
- Posts: 4858
- Joined: Wed Dec 01, 2004 1:57 pm
- Location: Munich, Germany
- Occupation: electrical engineer
Here's SJLOAD-20 V7 (d/l at the end of first post).
It comes with 2 pre-assembled binaries which load to $0400 or $B000, and are started with SYS1024 and SYS45056, respectively. The $0400 version can effectively hide in the lower 3K area, when that one is blocked from BASIC use by a RAM expansion in BLK1. I presume because of the extra loading time and their size it's not of much use to provide versions for unexpanded VIC-20. I found SJLOAD most useful, when it is used from within a program which does multiple loads (for example, VICtoria Gold Ed.).
Note: SJLOAD not only accelerates LOAD, but also SAVE and OPEN, PRINT#, INPUT#, GET#, CLOSE and their corresponding KERNAL entries.
Note 2: There's also a SJLOAD-20 V8, but that one only accelerates LOAD, and it is Mega-Cart specific because it installs into the NVRAM.
Edit: Seems the link is broken. I'll upload my copy on SkyDrive ...
It comes with 2 pre-assembled binaries which load to $0400 or $B000, and are started with SYS1024 and SYS45056, respectively. The $0400 version can effectively hide in the lower 3K area, when that one is blocked from BASIC use by a RAM expansion in BLK1. I presume because of the extra loading time and their size it's not of much use to provide versions for unexpanded VIC-20. I found SJLOAD most useful, when it is used from within a program which does multiple loads (for example, VICtoria Gold Ed.).
Note: SJLOAD not only accelerates LOAD, but also SAVE and OPEN, PRINT#, INPUT#, GET#, CLOSE and their corresponding KERNAL entries.
Note 2: There's also a SJLOAD-20 V8, but that one only accelerates LOAD, and it is Mega-Cart specific because it installs into the NVRAM.
Edit: Seems the link is broken. I'll upload my copy on SkyDrive ...
Last edited by Mike on Sat Aug 24, 2013 3:44 am, edited 1 time in total.
- Mike
- Herr VC
- Posts: 4858
- Joined: Wed Dec 01, 2004 1:57 pm
- Location: Munich, Germany
- Occupation: electrical engineer
Here's my mirror copy of SJLoad-20 V7.
Last edited by Mike on Thu Feb 20, 2014 4:20 pm, edited 1 time in total.
Would this version also work with a "standard" RAM-expansion from $9800-$a000 or even from a ROM placed there? This area ($9800-$a000) seems the ideal hiding place for such a fastloader as nearly no other VIC-software uses it. Mega-Cart just gets so much better by it and the inclusion of the file browser.There's also a SJLOAD-20 V8, but that one only accelerates LOAD, and it is Mega-Cart specific because it installs into the NVRAM.
- Mike
- Herr VC
- Posts: 4858
- Joined: Wed Dec 01, 2004 1:57 pm
- Location: Munich, Germany
- Occupation: electrical engineer
Most probably, yes.Would [SJLoad-20 V8] also work with a "standard" RAM-expansion from $9800-$a000 or even from a ROM placed there?
Boray, as an example of use I had SJLoad-20 V7 integrated into my panning VFLI viewer. Here the $B000 version (slightly renamed) is put on the *.d64, and viewer asks at the beginning whether to include it. The viewer requires RAM in BLK1..3 and BLK5.
As the slide show contains 15 images with ~10K each, you'll surely notice the speed difference on load.
Last edited by Mike on Thu Feb 20, 2014 4:21 pm, edited 1 time in total.
Thanks Mike! I just tried SJLOAD7 and heeey that is fast!!!
PRG Starter - a VICE helper / Vic Software (Boray Gammon, SD2IEC music player, Vic Disk Menu, Tribbles, Mega Omega, How Many 8K etc.)
Sorry Boray.Boray wrote: I don't think so. I tried loading a game, which took 7 seconds. Then I tried to load the same game with my vic-menu, and that took less than 6 seconds. Besides that, 20.prg only works on an unexpanded vic-20 and I want to use it with expanded memory.
I just had that file and wanted to help.
Pallas - OPByte
http://www.opbyte.it/vic20/
http://www.opbyte.it/vic20/