I just got a slot machine via mail from what I now know to be a bad dealer. The power plug was disconnected in route due to lack of packing material and jostling.
So here's my problem. I am trying to reinstall it, but I keep getting error messages and system crashes. Here's what the transformer looked like...
Code: Select all
white wire ----| Transformer |----straight connector
(attached AC)
|---\ bent connector
black wire ----| |----\ bent connector
(attached AC)
disconnected wire to Machine ----- (one white)
---(one black)
The machine had Black and White wires that obviously came loose from the machines original power system (with two ON/OFF switches and two fuses.) These should somehow connect to the transformer.
I tried to connect it... I put the white to the top connection (straight) and the black to the lower bent one and it came on with ERRORS. I assume that the voltage was incorrect. Enough to make it malfunction.
I don't want to screw it up more, so how should I try to connect it?