Hi everyone:
im having trouble with my cm2 cassette recorder when i run the following test program i get an "out of memory" error...
10 print" this is a test"
save test
new
load test
i have a red button on the side of my vic, and i got it used, mabie it was modded, any suggestions?????
please let me know....
Regards: Aaron...
help with cassette recorder
Moderator: Moderators
-
- Vic 20 Scientist
- Posts: 1193
- Joined: Tue Apr 28, 2009 3:51 pm
Your C2N may be terribly poor or there is some fault in the VIC. Usually OUT OF MEMORY happens immediately after FOUND if the azimuth angle on the R/W head is misaligned. But since you recorded the program using the same recorder as you read it back with, I don't think it should happen.
Anders Carlsson
Yes, this is really strange, try to repeat your tests with another vic or with a C64, even if head is misaligned, you should read what you have saved with the same datassette unless head is really dirty, try to clean it with alcohol and cotton.carlsson wrote:But since you recorded the program using the same recorder as you read it back with, I don't think it should happen.
Mega-Cart: the cartridge you plug in once and for all.