Here it is, the long awaited First Edition from Glaswegian Demo group 'Haxxorz' : FLAPPER author:Legacy
This is to be run on Unexpanded VICE Emulator
flapper.vsf
***NEW DEMO***
Moderator: Moderators
-
- Vic 20 Devotee
- Posts: 269
- Joined: Mon Feb 04, 2008 6:06 am
If you run VICE from the command line you can access the system monitor and save the BASIC code to disk as a .prg file.
HOWTO get BASIC programs out of VICE
Note this method will only work for a BASIC program. If you want Machine Code saved you need to work out it's end and start manually. Also I have not tested this method on Microsoft Windows only in Linux.
In case you have trouble I have already converted it to a prg file here.
http://richardjames13.110mb.com/vic20/flapper.zip
HOWTO get BASIC programs out of VICE
Code: Select all
Type in your program or load it.
In the VICE menu select the monitor
type
m 2b 2e
This will print out the start and end address of the BASIC program
remember the VIC stores 16bit addresses as low byte high byte
e.g.
>C:002b 01 10 03 10
start is the first two numbers 01 10 which is 1001
end is the second two numbers 03 10 which is 1003
type
save "test.prg" 0 1001 1003
or whatever numbers are the start and end of BASIC for your program
In case you have trouble I have already converted it to a prg file here.
http://richardjames13.110mb.com/vic20/flapper.zip
Change is inevitable except from a vending machine.
This BASIC code is screaming fast, watch out or you won't know what hit you! Demo #2 Legacy
Unexpanded 3583 Bytes Free
legacy.prg
Unexpanded 3583 Bytes Free
legacy.prg
The only way to program better is to find a better programmer. - Legacy 2009
Nice use of the VIC registers.Legacy wrote:This BASIC code is screaming fast, watch out or you won't know what hit you! Demo #2 Legacy
legacy.prg
-
- Vic 20 Devotee
- Posts: 269
- Joined: Mon Feb 04, 2008 6:06 am