TFW8B SD2IEC IEC plug: which cable goes to which pin?

pixel · Post by **pixel** » Sat Mar 04, 2023 6:36 am

There is black, green, red and brown. All ripped off. Does anybody know for sure, please? Will be fun trying to not burn my face...

srowe · Post by **srowe** » Sun Mar 05, 2023 4:58 am

Do you have a picture of where each wire is attached to on the PCB?

pixel · Post by **pixel** » Mon Mar 20, 2023 9:48 am

srowe wrote: ↑Sun Mar 05, 2023 4:58 am Do you have a picture of where each wire is attached to on the PCB?

No, it's glued shut.

srowe · Post by **srowe** » Mon Mar 20, 2023 11:38 am

pixel wrote: ↑Mon Mar 20, 2023 9:48 am No, it's glued shut.

How, ... helpful. Given there are four wires I would guess they are GND, DAT, CLK and ATN. There's a power connector too, right? How many wires does that have?

pixel · Post by **pixel** » Thu Mar 23, 2023 3:00 am

srowe wrote: ↑Mon Mar 20, 2023 11:38 am How, ... helpful. Given there are four wires I would guess they are GND, DAT, CLK and ATN. There's a power connector too, right? How many wires does that have?

Just those four colours I mentioned. Might as well just get a third drive, so I can give this one a treatment with a hot air gun. Heresy. I know.

Denial

TFW8B SD2IEC IEC plug: which cable goes to which pin?

TFW8B SD2IEC IEC plug: which cable goes to which pin?

Re: TFW8B SD2IEC IEC plug: which cable goes to which pin?

Re: TFW8B SD2IEC IEC plug: which cable goes to which pin?

Re: TFW8B SD2IEC IEC plug: which cable goes to which pin?

Re: TFW8B SD2IEC IEC plug: which cable goes to which pin?