FOR SALE: VIC20 FULL-RAM expansion cartridge +37K RAM with RESET!

Vic 20 Item Exchange

Moderator: Moderators

User avatar
MCes
Vic 20 Hobbyist
Posts: 142
Joined: Fri Jul 24, 2015 1:19 am
Location: Italy

Re: FOR SALE: VIC20 FULL-RAM expansion cartridge +37K RAM with RESET!

Postby MCes » Sat Jul 15, 2017 2:59 am

MCes wrote:
vicist wrote:This really is a great little card. :D
Thanks MCes.


Thanks Vicist,
I'm happy for your enthusiasm in discovering the potentiality of your "new" VIC20 system...
If I remember well the RAM into i/o areas is (now) out of VICE possibilityes.... the real world win!

Try the attached file, it should be the SJLoad $98 modified to be started by "SYS40000", an more mnemonic address....

sjl$98-SYS40000.zip
SJL 07 $9800 SYS40000
(1.27 KiB) Downloaded 7 times


Errata corrige:
the file before is without header, the follow one is ready to be put onto a disk, or on VICE.
(thanks for info about VICE, now I'll download a newer version!)
Pay attention: NOT SYS4000 but SYS40000 (four times zero)

sjl$98-SYS40000.zip
SJL 07 $9800 SYS40000
(1.27 KiB) Downloaded 7 times
“Don’t argue with idiots because they will drag you down to their level and then beat you with experience” (Mark Twain ?)

User avatar
MCes
Vic 20 Hobbyist
Posts: 142
Joined: Fri Jul 24, 2015 1:19 am
Location: Italy

Re: FOR SALE: VIC20 FULL-RAM expansion cartridge +37K RAM with RESET!

Postby MCes » Sun Jul 16, 2017 2:54 am

A question:
SJLoad work only on PAL VIC20 or on NTSC too?

About comparing Tokra $98C40-assembled SJLoad version and my $9800 (SYS40000) assembled version:
Tokra's one is a smaller file (less than 1k) and use only I/O3 area (I/O2 free), but it's limited (no SJ-save, no declaring start-stop address....)
My file is regular size and has all features of standard $98 assembled version and when you start it will be writed "SJLOAD V07 SYS40000",
but it need I/O2+I/O3 area

Option that I used:

Code: Select all

SJSAVE = 1                              ; 0 = Don't compile SJsave routines   (LOAD only)
                                        ; 1 = compile SJsave routines

BASIO = 1                               ; 0 = Don't compile basic IO routines (LOAD/SAVE only)
                                        ; 1 = compile basic IO routines

PRINTADDRESS = 1                        ; 0 = Don't print start/end address
                                        ; 1 = print start/end address

LOADPARAMS = 1                          ; 0 = Don't compile with additional LOAD parameters
                                        ; 1 = compile with additional LOAD parameters

SAVEPARAMS = 1                          ; 0 = Don't compile with additional SAVE parameters (if SJSAVE == 1 )
                                        ; 1 = compile with additional SAVE parameters (if SJSAVE == 1 )

; This option works if PRINTADDRESS = 0 ONLY

PRINTMESSAGE = 0                        ; 0 = Don't print SAVING/LOADING Message
                                        ; 1 = print SAVING/LOADING Message like standard kernal routines
“Don’t argue with idiots because they will drag you down to their level and then beat you with experience” (Mark Twain ?)

User avatar
MCes
Vic 20 Hobbyist
Posts: 142
Joined: Fri Jul 24, 2015 1:19 am
Location: Italy

Re: FOR SALE: VIC20 FULL-RAM expansion cartridge +37K RAM with RESET!

Postby MCes » Fri Jul 21, 2017 3:42 am

only 5 pieces still available!
“Don’t argue with idiots because they will drag you down to their level and then beat you with experience” (Mark Twain ?)

User avatar
MCes
Vic 20 Hobbyist
Posts: 142
Joined: Fri Jul 24, 2015 1:19 am
Location: Italy

Re: FOR SALE: VIC20 FULL-RAM expansion cartridge +37K RAM with RESET!

Postby MCes » Mon Oct 02, 2017 4:43 am

only 4 pieces still available!
“Don’t argue with idiots because they will drag you down to their level and then beat you with experience” (Mark Twain ?)

User avatar
MCes
Vic 20 Hobbyist
Posts: 142
Joined: Fri Jul 24, 2015 1:19 am
Location: Italy

Re: FOR SALE: VIC20 FULL-RAM expansion cartridge +37K RAM with RESET!

Postby MCes » Fri Dec 01, 2017 3:03 pm

last price: 29€
“Don’t argue with idiots because they will drag you down to their level and then beat you with experience” (Mark Twain ?)


Return to “Buy, Sell, and Trade”

Who is online

Users browsing this forum: No registered users and 1 guest