Lookking for control/joystick port and pwr switch parts.
Moderator: Moderators
Lookking for control/joystick port and pwr switch parts.
Have two older "two power prong" VIC models that need better power switches and one that needs a replacement control/joystick port. Looking for either a dead motherboard or the parts already desoldered. Have various VIC ICs and a CR model case top and bottom if you want to trade or I could just buy off of you via PayPal once we trade photos. PM me if you are interested. Thanks.
- mrr19121970
- Vic 20 Nerd
- Posts: 873
- Joined: Tue Jan 19, 2016 9:22 am
- Location: Germany
- Occupation: IT service manager
Re: Lookking for control/joystick port and pwr switch parts.
Phil has the joysticks ports. Ask him about the power switch too
. Worldwide postage is 3gbp
http://store.retroleum.co.uk/c64-connectors
. Worldwide postage is 3gbp
http://store.retroleum.co.uk/c64-connectors
Re: Lookking for control/joystick port and pwr switch parts.
I see Commodore 64 parts, but no VIC-20 parts on that site. I did shoot off an email to them and see if they do have any though. Thanks for the info as I restore many different console and computer systems.mrr19121970 wrote:Phil has the joysticks ports. Ask him about the power switch too
. Worldwide postage is 3gbp
http://store.retroleum.co.uk/c64-connectors
Re: Lookking for control/joystick port and pwr switch parts.
Yeah. As I suspected the C64 and cost reduced newer model VIC-20 share the same style control/game port, but the original VIC-20 model with the bronze case badge and internal black heat sinks has its own style control/game port with different configured screw mounts. I will probably just end up waiting until I find a dead older model VIC-20 to part out from.
- mrr19121970
- Vic 20 Nerd
- Posts: 873
- Joined: Tue Jan 19, 2016 9:22 am
- Location: Germany
- Occupation: IT service manager
Re: Lookking for control/joystick port and pwr switch parts.
Joystick looks the same to me.
Re: Lookking for control/joystick port and pwr switch parts.
the port may look the same and work the same but the actually connector is very different between the 2
I took a pic but its to large for the site
I took a pic but its to large for the site
home of Coprolite Computer By-Products
Re: Lookking for control/joystick port and pwr switch parts.
I am not talking about on the side. If you actually open the lid you will see the mounting screw placements are not the same on the motherboard. As a matter of fact the cost reduced VIC-20 model and the Commodore 64 have the same mounting screw spacing on their motherboards. The early model VICs are kind of on their own as far as the control port is concerned.mrr19121970 wrote:Joystick looks the same to me.
- mrr19121970
- Vic 20 Nerd
- Posts: 873
- Joined: Tue Jan 19, 2016 9:22 am
- Location: Germany
- Occupation: IT service manager
Re: Lookking for control/joystick port and pwr switch parts.
Did you ever get sorted out here ? I have the parts you need.