Vic 20 Black screen

Modding and Technical Issues

Moderator: Moderators

Post Reply
Darbyram
Vic 20 Newbie
Posts: 6
Joined: Tue Sep 26, 2017 9:25 am
Location: United Kingdom

Vic 20 Black screen

Post by Darbyram »

Hi there my vic 20 has just died with black screen, before that it had crashed in a game. the led lights up when i power in on.
Cant start the cassette deck with shift-runstop. sometimes when turning it on and off i get a screen full of garbled characters. any thoughts?
User avatar
srowe
Vic 20 Scientist
Posts: 1325
Joined: Mon Jun 16, 2014 3:19 pm

Re: Vic 20 Black screen

Post by srowe »

Welcome to Denial.

Ray's excellent diagnostic document is a good starting point

http://personalpages.tds.net/~rcarlsen/ ... /vic20.txt

There are a number of possible causes:
  • CPU
  • VIC
  • RAM
  • Address line buffers
Are any of the chips in your system socketed? If they are it's an easier task to swap in known good replacements.
Darbyram
Vic 20 Newbie
Posts: 6
Joined: Tue Sep 26, 2017 9:25 am
Location: United Kingdom

Re: Vic 20 Black screen

Post by Darbyram »

Thanks just looked at the guide. i have just left it on the black screen with led on for about 20 minutes and it turned itself off??
User avatar
srowe
Vic 20 Scientist
Posts: 1325
Joined: Mon Jun 16, 2014 3:19 pm

Re: Vic 20 Black screen

Post by srowe »

By "turned itself off" do you mean the power LED has gone out? That would suggest the fuse has blown or there's a more fundamental issue with the power supply.
Darbyram
Vic 20 Newbie
Posts: 6
Joined: Tue Sep 26, 2017 9:25 am
Location: United Kingdom

Re: Vic 20 Black screen

Post by Darbyram »

Yes the LED light goes out and screen turns to static like it does when you switch it off
User avatar
srowe
Vic 20 Scientist
Posts: 1325
Joined: Mon Jun 16, 2014 3:19 pm

Re: Vic 20 Black screen

Post by srowe »

Check the clip that holds the fuse within the VIC, it might not be making a good contact.

Which model do you have? The original two pin or the CR with the round DIN socket?
Darbyram
Vic 20 Newbie
Posts: 6
Joined: Tue Sep 26, 2017 9:25 am
Location: United Kingdom

Re: Vic 20 Black screen

Post by Darbyram »

Fuse and folder ok, its the round DIN type

Edit..just ordered a new board that's been tested and a decent price :D
User avatar
beamrider
Vic 20 Scientist
Posts: 1447
Joined: Sun Oct 17, 2010 2:28 pm
Location: UK

Re: Vic 20 Black screen

Post by beamrider »

Are you using an original PSU? If so that could have fried it...
Darbyram
Vic 20 Newbie
Posts: 6
Joined: Tue Sep 26, 2017 9:25 am
Location: United Kingdom

Re: Vic 20 Black screen

Post by Darbyram »

yes its an original wedge one..how do i go about testing it?
User avatar
srowe
Vic 20 Scientist
Posts: 1325
Joined: Mon Jun 16, 2014 3:19 pm

Re: Vic 20 Black screen

Post by srowe »

Do you have a multimeter? I'd be careful about plugging a new board into a suspect PSU. You should have a steady 5V DC off pins 4 & 5, 9V AC off pins 6 & 7.

http://sleepingelephant.com/denial/wiki ... r_Supplies

I'd check the voltage while plugged into the current board, if it's producing too high a voltage it might have damaged some chips already.
User avatar
beamrider
Vic 20 Scientist
Posts: 1447
Joined: Sun Oct 17, 2010 2:28 pm
Location: UK

Re: Vic 20 Black screen

Post by beamrider »

I think the general consensus is not to use those PSUs without replacing or upgrading them.. Even if it tests OK at the moment, it's quite likely to fail in the future. Also I've heard it said that the voltage over-supply can be sporadic so might be ok when you check it but spike at other times.

See this thread...a similar thing happened to me.

http://sleepingelephant.com/ipw-web/bul ... =11&t=8318
Darbyram
Vic 20 Newbie
Posts: 6
Joined: Tue Sep 26, 2017 9:25 am
Location: United Kingdom

Re: Vic 20 Black screen

Post by Darbyram »

Cheers guys. don't have a multimeter. I have ordered another PSU that's been tested
User avatar
beamrider
Vic 20 Scientist
Posts: 1447
Joined: Sun Oct 17, 2010 2:28 pm
Location: UK

Re: Vic 20 Black screen

Post by beamrider »

As mentioned if its an original one there is no guarantees it won't spike. Need a modern PSU to be safe or get a "saver" device to connect between the PSU and the computer.
User avatar
Floopy
Vic 20 Devotee
Posts: 221
Joined: Mon Feb 27, 2017 7:38 pm
Location: US

Re: Vic 20 Black screen

Post by Floopy »

It's the BSoD, :lol:
(Black screen of death)
-Floopy
User avatar
Mike
Herr VC
Posts: 4816
Joined: Wed Dec 01, 2004 1:57 pm
Location: Munich, Germany
Occupation: electrical engineer

Re: Vic 20 Black screen

Post by Mike »

Darbyram wrote:i have just left it on the black screen with led on for about 20 minutes and it turned itself off??
What did you expect? That the initial damage inside your VIC-20 would repair itself?
don't have a multimeter.
Then buy another set of working VIC-20 and PSU on ebay.

Using either a defective VIC-20 (with internal shorts on the voltage rails or within ICs) or a defective PSU (with overvoltage due to a defective voltage regulator) is likely going to take the other, functioning unit with it.

If you don't own a multimeter, you have no way to zero in on the originally defective part.
Post Reply