Denial

From that archive, only copy the contents of the SD folder to the root of your SD card. As mrr19121970 says, the LOADER has to be in the root directory. Also make sure your card is not formatted NTFS.

Heather

I'm going to do a full write-up of the LOADER syntax with examples to make it easier to understand. I'm also going to make the RTC instructions easier.

Heather

There's a collection on Zimmers:

http://www.zimmers.net/anonftp/pub/cbm/ ... ection.zip

Heather

I was planning on doing this myself. I'd be happy to collaborate with you on yours instead if you like. I too found the last manual difficult to understand. I'll download yours to see what you have.

Heather

I'm very happy you received your FE3! Don't worry, your cartridge is working properly. The 'Disk Loader' function is not a SD card browser. It is a program launcher that needs to be configured for the programs stored on your SD card. You need a specially formatted LOADER file in each directory. The ...

Fully assembled units for rmelick and RobertBe shipped today. That takes care of all the Denial orders. Thanks everyone for supporting the project! I'm taking names for a possible future run of devices. If I get enough interest then there will be another run.

Thanks!

Heather

Shipping of assembled units has started. I'll be shipping a few each day until they are all shipped. I'll send a PM with tracking or customs information once your package ships.

Thanks!

Heather

The error was left intact for all the kits that I sent so the builder could decide if they wanted to cut it. However, I cut the trace on all the fully assembled devices.

Heather

Kits shipped today to rgrocha and lgallair. I'm working on assembly of all the assembled units and they should ship by next Monday or Tuesday.

Heather

I'd love to find a 1020. :) I think doing that would be simple enough. I'll let you know. Do you happen to know the max size in mm that the space would have to be? Is it always centered between two connectors? When you say Left and Right, do you mean left and right looking at the cartridge with the ...

Good to hear the issue was with the SD card and not your cartridge!

I'm assembling the kits this weekend for those who purchased fully assembled devices.

Heather

Go ahead and re-flash the firmware. However, I think your SD card is the issue. Try with a card 8GB or below.

Heather

What does it do without an SD card inserted? Does the SD2IEC work? I'd say you should re-flash the SD2IEC firmware. You should use the larsp-m1284p firmware. Just copy it to the root of the SD card, insert it into the FE3 then turn on the VIC-20. https://sd2iec.de/sd2iec-current-binaries.zip Heather

The SD2IEC LEDs should only stay on for a moment when the device is started or reset. The only time it should stay on as long as you are seeing is when the firmware is being flashed. Make sure you don't have any SD2IEC firmware files on your SD card. I've never seen it stay on longer in any other si...

Glad you got it working. I sent you a link to R022d firmware. Sorry it wasn't flashed beforehand. It should have been.

Heather