Search found 104 matches

by armypavarmy
Mon Feb 13, 2023 4:31 am
Forum: Programming
Topic: V-FORTH - Forth-83 for the VIC
Replies: 281
Views: 72907

Re: V-FORTH - Forth-83 for the VIC

Hello everyone
This listing I took from the C64 version
It doesn't work with the Vicforth because the RND command is not recognized.
How to add it to Vfort V4.7??
Thanks for help.
by armypavarmy
Thu Nov 17, 2022 3:58 am
Forum: Programming
Topic: Espansion 8k+
Replies: 6
Views: 860

Re: Espansion 8k+

thank you Mike for your precious and quick help.
All solved. long last.
by armypavarmy
Wed Nov 16, 2022 6:13 am
Forum: Programming
Topic: Espansion 8k+
Replies: 6
Views: 860

Espansion 8k+

scgrf-8k.zip scgrf-8k.zip Hello , I have a 3d graphics program for Vic20 8k + Ram that requires Poke44,36 before loading. Only with the expansion "Vixen 8k-16k" and other expansion Italian Lx700) works. With expansion "VIC1110 eFE3-Alpha and others" The poke 44.36 generates erro...
by armypavarmy
Wed Nov 24, 2021 11:03 am
Forum: Collecting and History
Topic: Super Expander Japan edition (Vic-1211m)
Replies: 7
Views: 2837

Re: Super Expander Japan edition (Vic-1211m)

Vic 20 Graphic- Program.zip
(7.72 KiB) Downloaded 111 times
Hello
see if it can be useful to you
I wrote this summary.
greetings Armando
by armypavarmy
Sat Sep 04, 2021 8:19 am
Forum: Programming
Topic: Reliving VIC20
Replies: 18
Views: 1322

Re: Reliving VIC20

Hello.
Runs fine on my PAL VIC with an LCD TV.

Bad on NTSC Vic.

Armando
by armypavarmy
Mon Feb 22, 2021 3:00 am
Forum: Programming
Topic: VicSAM without SID
Replies: 31
Views: 2768

Re: VicSAM without SID

Hello Thanks for your attention. I checked. The "turbo 0800" file It does not charge. With error emulator. as I wrote yesterday. With Vic20 and SD2iec. Charging stops and the SD2iec LED flashes red. The turbo file is not loaded. Check if you can. I think maybe it's just the file you entere...
by armypavarmy
Sun Feb 21, 2021 6:02 am
Forum: Programming
Topic: VicSAM without SID
Replies: 31
Views: 2768

Re: VicSAM without SID

Hi I'm Armando Correct voice3 works ok also on Vic20 true Pal and Ntsc. Sam6bturbo Not working After loading it stops with the message “error in 0 ……. " Also with modification to line 110. Tests performed with emulator and then with Vic20Pal and with real Vic20Ntsc I have two of each of them wo...
by armypavarmy
Sat Feb 20, 2021 10:05 am
Forum: Programming
Topic: VicSAM without SID
Replies: 31
Views: 2768

Re: VicSAM without SID

Good program , but
If load and run program "vic song"
bad voice and at the end
Message " ? sintax error in line 8280 "

With emulator WinVice 3.1 or Vic20 real

Thank you for help. Armando
by armypavarmy
Thu Nov 05, 2020 8:42 am
Forum: Programming
Topic: MINIGRAFIK lineart
Replies: 47
Views: 16770

Re: MINIGRAFIK lineart Spiralizer

Very Nice "Spiralizer" graphics program
Version for Minigrarfik.
Thanks to the decisive help of Mike from Denial
which followed the conversion.
Adapted from original version for "Super Expander"
Program and attached document.
Spiralizer-UK-Minigrafik-8k.zip
(129.51 KiB) Downloaded 67 times
1-7-50-9-D.jpg
by armypavarmy
Tue Oct 27, 2020 7:15 am
Forum: Programming
Topic: message "division by zero error"
Replies: 21
Views: 1198

Re: message "division by zero error"

[attachment=0]spiramgr.zip Hello Mike I made all the changes that you told me. There continue to be problems. In addition to the parameters m and d also the first data (for number of designs on one screen only) is accepted but always runs only one graph. I don't know if I did something wrong? I am a...
by armypavarmy
Mon Oct 12, 2020 6:01 am
Forum: Programming
Topic: message "division by zero error"
Replies: 21
Views: 1198

Re: message "division by zero error"

Hello Mike The version for Minigrafik which I am trying to do. It works partly because the number entered in "Spin" is not shared. With Minigrafik the graphic is repeated beyond the number of sometimes referred to in "Spin- 1 to 18" and consequently if it does not stop it goes Ou...
by armypavarmy
Sun Oct 11, 2020 2:05 am
Forum: Programming
Topic: message "division by zero error"
Replies: 21
Views: 1198

Re: message "division by zero error"

Hello Mike
thanks for help.
Command changed for Minigrafik
as you indicated the draw works.
However, it is not enough because there are problems with the parameters entered.
Listed for me strange and unusual.
It should be rewritten for Minigrafik
for 100% operation
Thanks anyway…….Armando
by armypavarmy
Fri Oct 09, 2020 5:11 am
Forum: Programming
Topic: message "division by zero error"
Replies: 21
Views: 1198

Re: message "division by zero error"

thanks mike in this listing example: first origin with point 1,100,100 after only the draw to x, y command as I do with Minigrafik I have to write @ 1,100,100 to x, y and then ? I should write @ 1,100,100 and then @ 1 to x, y but it is not possible. Minigrafik that I have does not accept also multip...
by armypavarmy
Fri Oct 09, 2020 1:23 am
Forum: Programming
Topic: message "division by zero error"
Replies: 21
Views: 1198

Re: message "division by zero error"

Hello Mike
thanks so much for your unexpected help.
Now the program works.
It's very beautiful.
I would like to bring it to Minigrafik
The problem is that Minigrafik
does not have the command: Draw TO X, Y.
Whenever possible I always adapt graphic programs
with Minigrafik.
greetings ----- Armando
by armypavarmy
Thu Oct 08, 2020 4:38 am
Forum: Programming
Topic: message "division by zero error"
Replies: 21
Views: 1198

Re: message "division by zero error"

I'll wait for an answer
because the proposed solution does not work. thanks ..... Armando