Denial

Here is the reponse I got from Jim Drew regarding this issue: With the VIC-20, 3 of the joystick lines are connected to the USER PORT. 2 of ...

Hi, I have one of Jim Drew's Wimodem's plugged into my VIC-20's user port. It works great, and I usually leave it installed all the ...

... misconceptions I see all the time. The same stuff was debated with Jim Drew last year on Melon64, other qualified people got in and just bulldozed him. I find it ...

NinjaTerm supports 2400 baud. I've used it reliably with the EZ232 interface and a RPi. I had mixed results with the Jim Drew WiFi modem.

https://github.com/sharpninja/ninjaterm

I know. Did Jim Drew admit he dropped the ball because he ran into a dead end ? actually he keeps argueing about unrelated issues ...

... people for 3 years that he developed a drive emulator. I know. Did Jim Drew admit he dropped the ball because he ran into a dead end ?

... so you don't have to do this every time. I've talked to the developer, Jim Drew, about this problem with the default baud rate and VIC-20s. He was open to the idea of ...

Jim Drew just released firmware v1.8 for the WiModem (ATUPDATE to update it!)

I am testing v1.8 with flow control enabled (AT&K1) using the RSS Reader.

So far so good ... but I have only been testing for ten minutes so far.

... it on the modem with AT&K1 the modem crashes (Soft WDT Reset.) Jim Drew is working on a new firmware which he thinks may fix this issue. Once we have the new ...

Note that the WinMODEM defaults to 2400 baud when you get it from Jim Drew. You have to reset it to 1200 baud to use it with a VIC-20, or you will get garbled feedback ...

... (which we actually suspect will be the case based on discussion with Jim Drew, the WiModem guy.) [Things are a bit crazy right now for me, but when I get a chance I ...

... commands even when baud rate is wrong). I have been corresponding with Jim Drew, and he agrees with the idea of setting the future WiModems he sells to a default baud ...

... I developed and tested this code using the WiModem from cbmstuff.com (Jim Drew). It should also work with other Internet modems that are able to 'dial' URLs using the ...

Back to the WiModem - I found a post from Jim Drew on Lemon64 from last week, and it is good news!! We have incoming data! I released v1.5 which adds ...

... definition I know of is "Fear Uncertitude and Doubt" - When Jim Drew posts that a "PLA that consumes 10mA is a myth", something confirmed by Thomas ...