Difference between revisions of "Cassette tape port"
Jump to navigation
Jump to search
m (Add heading) |
m (Fix connector pitch) |
||
Line 1: | Line 1: | ||
− | The cassette tape port is a | + | The cassette tape port is a .156" edge connector located on the back of the VIC-20, in between the [[user port]] and the [[serial bus]]. |
[[Image:Tapeport.jpg]] | [[Image:Tapeport.jpg]] |
Revision as of 16:02, 16 June 2017
The cassette tape port is a .156" edge connector located on the back of the VIC-20, in between the user port and the serial bus.
This port is compatible with Commodore datasette cassette tape drives made for the PET series, the VIC-20, as well as the Commodore 64. It is sometimes used to supply power to devices attached to the serial bus such as the SD2IEC.
Pinout
Pin | Connection | Use |
---|---|---|
A,1 | GND | |
B,2 | +5V | |
C,3 | VIA #1 CA2 | Cassette motor |
D,4 | VIA #2 CA1 | Cassette read |
E,5 | VIA #2 PB3 | Cassette write |
F,6 | VIA #1 PA6 | Cassette switch |